BPQLV - 643, EVERFIX EPOXY RESIN

Product Identification

Product ID:643, EVERFIX EPOXY RESIN
MSDS Date:03/21/1991
FSC:8040
NIIN:00N033623
MSDS Number: BPQLV

Responsible Party
FIBRE GLASS-EVERCOAT CO INC
6600 CORNELL RD
CINCINNATI, OH 45242
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 800-729-7600

Preparer: JEFF ZYCH

Cage: 18731

Contractor
FIBRE GLASS-EVERCOAT CO INC
CINCINNATI, OH 45242 US

Telephone: 513-489-7600

Cage: 18731

Ingredients

EPOXY RESIN

CAS: 25068-38-6

RTECS: KC2100000

Fraction By Weight: 50%


PHENOL, NONYL-; (NONYLPHENOL)

CAS: 25154-52-3

RTECS: SM5600000

Fraction By Weight: 25%


TEREPHTHALIC ACID, BIS (2-ETHYLHEXYL) ESTER; (DIOCTYL

CAS: 6422-86-2

RTECS: WZ0883500

Fraction By Weight: <5.0%


PIPERAZINE, 1-(2-AMINOETHYL)-; (N-AMINOETHYLPIPERAZINE).

CAS: 140-31-8

RTECS: TK8050000

Fraction By Weight: <5.0%


1.0 @ 212F.

CAS: 9046-10-0

Fraction By Weight: 15%


PHENOL, 2,4,6-TRIS (DIMETHYLAMINOMETHYL)-;

CAS: 90-72-2

RTECS: SN3500000

Fraction By Weight: <5.0%


0 (CALCULATED)

RTECS: 9999999VO

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PART B AMINE SIDE IS CORROSIVE AND CAN
CAUSE SENSITIZATION. SENSITIZED INDIVIDUALS CAN SHOW AN ALLERGIC
RESPONSE WITH ASTHMA LIKE SYMPTOMS. CONTACT WITH EYES CAN CAUSE
BLINDNESS. PART A EPOXY IS AN IR RITANT. INHALATION: VAPORS MAY
CAUSE NOSE,THROAT AND RESPIRATORY TRACT IRRITATION. HIGH
CONCENTRATIONS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: MAY CAUSE HEADACHE AND NAUSEA. SKIN
AND EYE: CONTACT WITH SKIN CAUSES IRRITATION. CONTACT WITH EYES
CAUSES SEVERE IRRITATION, POSSIBLY BLINDNESS. SKIN ABSORPTION:
PROLONGED OR REPEATED EXPOS URE MAY CAUSE ASTHMA LIKE BREATHING
ANDSKIN SENSITIZATION OR OTHER ALLERGIC RESPONSE. INGESTION:
HARMFUL TO GI TRACT.
Medical Cond Aggravated by Exposure:CERTAIN SKIN, EYE AND LUNG
DISORDERS.

First Aid

First Aid:SKIN: WASH WITH SOAP AND WATER. EYE: FLUSH WITH WATER FOR AT
LEAST 15 MINUTES AND GET MEDICAL ATTENTION. INHALATION: REMOVE FROM
EXPOSURE. IF UNCONSCIOUS GIVE ARTIFICIAL RESPIRATION OR OXYGEN AS
NEEDE D. GET MEDICAL ATTENTION. INGESTION: DONOT INDUCE VOMITING
(ASPIRATION HAZARD: GET MEDICAL ATTENTION).

Fire Fighting

Flash Point Method:CC
Flash Point:>200F,>93C
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY
BE TOXIC.

Accidental Release

Spill Release Procedures:ABSORB SPILL WITH ABSORBENT MATERIAL SUCH AS
VERMICULITE OR SAND. WASH CONTAMINATED AREA WITH SOAP AND WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID STORAGE ABOVE 100F. STORE ONLY
IN ORIGINAL CONTAINERS. DO NOT MIX PART A AND B UNTIL READY TO USE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED ORGANIC VAPOR CARTRIDGE
RESPIRATOR WHEN EXPOSURE TO VAPOR OR MIST IS LIKELY. WEAR
NIOSH/MSHA APPROVED DUST MASK WHEN SANDING CURED PRODUCT.
Ventilation:PROVIDE MECHANICAL (GENERAL AND/OR LOCAL EXHAUST)
VENTILATION IF NEEDED.
Protective Gloves:PLASTIC OR CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEM WORK GOG/FULL LGTH FACESHLD .
Other Protective Equipment:USE BARRIER CREAM SUCH AS GLOVE COAT WHEN
USING PRODUCT. EMERGENCY EYE WASH AND DELUGE SHOWER .
Work Hygienic Practices:REMOVE AND WASH CONTAMINATED CLOTHING. WASH
HANDS BEFORE EATING AND DO NOT SMOKE WHILE USING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:>392F,>200C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:1.05 (H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NIL
Appearance and Odor:CLEAR LIQUID, SHARP ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND OXIDIZING AGENTS.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:HEATING TO DECOMPOSITION MAY CAUSE
IRRITATING ACRID FUMES.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL FEDERAL, STATE
AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.